Melting Point: 1220° F 660° C Flow Point: 1305° F 705° C
Application: ***All Compositional numbers are based upon weight percentages***
SILVALOY A50N is a cadmium free silver brazing alloy. Addition of nickel to the silver-copper zinc alloy imparts corrosion properties which retards joint or interface corrosion of the brazed assembly. Typical applications are the joining of 300 series stainless steels in the food, medical, and dental fields. The nickel element in SILVALOY A50N also improves the bond strength when joining of tungsten carbide cutting tips.
Melting Point: 1145° F 620° C Flow Point: 1205° F 650° C
Application: ***All Compositional numbers are based upon weight percentages***
Typical applications are the joining of ferrous, nonferrous, and dissimilar metals, with close joint clearances. It is often selected for use on silver or stainless steel due to its excellent color match. SILVALOY A56T FC is often used on nickel, nickel alloys, or stainless steel because it does not cause stress cracking as readily as the other low melting brazing filler metals. The fact that SILVALOY A56T FC contains no cadmium has led to its use on food handling equipment where cadmium may be considered a hazard and its use is prohibited by law.
Melting Point: 1125° F 605° C Flow Point: 1145° F 620° C
Application: ***All Compositional numbers are based upon weight percentages***
SILVALOY 45 is the lowest melting brazing alloy available composed of silver, copper, zinc and cadmium. It is suitable for use on most metals except aluminum and magnesium. It is used for joining steel, stainless steel, copper, copper alloys, nickel, nickel alloys or combinations of these metals. It has wide acceptance by industrial users, as well as being included in Federal and military specifications on brazing filler metals or alloys. It has a narrow melting range which is not apparent in most brazing operations, making it flow freely through a capillary.Typical applications are the joining of ferrous, nonferrous and dissimilar metals. Silvaloy 45 should be used for close joint clearances (0.000-0.003in).
