Silvabrite 100 Solder Products

Silvabrite 100 Solder Products - silvaloy.com

	SILVABRITE 100® Lead-Free Solder SILVABRITE 100 is a safe and easy to use solder for drinking water systems and other applications. (RoHS Compliant) SILVABRITE 100 is a lead-free and antimony free, non-toxic solder which contains the same safe metals used in dental fillings. It offers a low melting point and a wider melting range for excellent flow and control. SILVABRITE 100 also creates strong, corrosion resistant and leak-tight joints.

SILVABRITE 100®
Lead-Free Solder

SILVABRITE 100 is a safe and easy to use solder for drinking water systems and other applications. (RoHS Compliant)

SILVABRITE 100 is a lead-free and antimony free, non-toxic solder which contains the same safe metals used in dental fillings. It offers a low melting point and a wider melting range for excellent flow and control.

SILVABRITE 100 also creates strong, corrosion resistant and leak-tight joints.

Call 800-225-2130 to speak to a Customer Service Representative Now!

Applications
SILVABRITE 100 is suitable for joining copper, steel, stainless steel, nickel metals and alloys. It is most often applied by torch heating or soldering iron, but can be used with all conventional heating methods. SILVABRITE 100 is used with a general purpose soldering flux. It's flow and wetting action are excellent.

Product	Tin	Copper	Silver	Temp	Rec. Temp Range	Density lbs/cu in	Tensile
SILVABRITE 100	95.6%	4%	0.4%	440º F	440-500º F	.267	6,900 psi
SILVABRITE	96%	---	4%	430º F	430-450º F	.267
SILVABRITE S	95%	---	5%	430º F	430-550º F	.267

Wolverine Lead Free Solder Reference Chart

Product	ASTM	Fed Spec QQ-B-650
SILVABRITE 100	ASTM B32	Alloy Grade E
SILVABRITE	ASTM B32	Alloy Grade SN 96
SILVABRITE S	ASTM B32	Alloy Grade SN 95

Electrical Conductivity (% IACS)

SILVABRITE 100	12.0
60/40 Tin	11.5

Pressure Rupture Test:
Soldered joints using SILVABRITE 100 and L type copper tube (up to 1" diameter) at room temperature, 250ºF and 300ºF, withstood pressure to the extent that failure occurred in the copper and not in the soldered joint.

Stress Rupture Test (Creep Strength):
Standard 1/2" copper couplings are soldered in this test and put under constant loads. The time in which the joint failed by breaking is indicated in the table:

Solder	1,700 lbs	1,500 lbs	1,200 lbs	700 lbs	500 lbs
SILVABRITE 100	5 days	7-8 days	144 days	---	---
50/50 Tin-Lead	<1 day	<1 day	<1 day	5-7 days	33 days

Stress Rupture Test Data:
Using standard Tafel Electochemical techniques and ASTM-Corrosive Water D1384, the following corrosion test data has been compiled. SILVABRITE 100 is twice as corrosion resistant as 50/50 Tin-Lead and seven times as corrosion resistant as 95/5 Tin-Antimony.

SILVABRITE 100	0.31 mils/year
50/50 Tin-Lead	0.63 mils/year
95/5 Tin-Antimony	2.2 mils/year